Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® A3HG6 WIT bk20560 - (PA66+PA6T/6)-(GF+GB)30 - BASF

Material Data Center offers the following functions for Ultramid® A3HG6 WIT bk20560:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Glass fibre reinforced injection moulding grade with good resistance to hydrolysis, suited for processing by water injection technology (WIT). Applications in the automotive cooling circuit, e.g. cooling water pipes.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 8 / * cm³/10min ISO 1133
温度 275 / * °C -
荷重 5 / * kg -
成形収縮率, 平行 0.4 / * % ISO 294-4, 2577
成形収縮率, 直角 0.9 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 8700 / 5300 MPa ISO 527
破壊応力 165 / 95 MPa ISO 527
破壊ひずみ 3 / 4.9 % ISO 527
シャルピー衝撃強さ, +23°C 55 / 85 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C 50 / 50 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 6 / 8 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C 5 / 5 kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 230 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 250 / * °C ISO 75-1/-2
その他の特性.乾燥/調湿単位テスト基準
密度 1370 / - kg/m³ ISO 1183
材料特有の特性乾燥/調湿単位テスト基準
ISO データ
粘度数 146 / * cm³/g ISO 307, 1157, 1628
機能
 粘度せん断速度. , Ultramid® A3HG6 WIT bk20560, (PA66+PA6T/6)-(GF+GB)30, BASF
 せん断応力-せん断速度. , Ultramid® A3HG6 WIT bk20560, (PA66+PA6T/6)-(GF+GB)30, BASF
 応力-ひずみ. , Ultramid® A3HG6 WIT bk20560 (乾燥), (PA66+PA6T/6)-(GF+GB)30, BASF
 応力-ひずみ. , Ultramid® A3HG6 WIT bk20560 (調湿), (PA66+PA6T/6)-(GF+GB)30, BASF
 割線弾性率−ひずみ. , Ultramid® A3HG6 WIT bk20560 (乾燥), (PA66+PA6T/6)-(GF+GB)30, BASF
 割線弾性率−ひずみ. , Ultramid® A3HG6 WIT bk20560 (調湿), (PA66+PA6T/6)-(GF+GB)30, BASF
 引張弾性率-温度. , Ultramid® A3HG6 WIT bk20560 (調湿), (PA66+PA6T/6)-(GF+GB)30, BASF
特殊な特性
納入形状.
ペレット., 黒
領域別の利用可能性
その他の情報
村遜速揃
PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 290 - 310 °C
injection molding, Melt temperature, recommended: 300 °C
injection molding, Mold temperature, range: 80 - 90 °C
injection molding, Mold temperature, recommended: 80 °C
injection molding, Dwell time, thermoplastics: 10 min
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.